Intermec SF61B 1D Guia do Utilizador descarregar pdf (Página 19)

Chapter 1 — About the SF61B Cordless Scanner

SF61 Cordless Scanner User’s Guide 7

Turn On the SF61B

To turn the scanner on, press and release the scan button. The SF61B

beeps twice and vibrates at power-up (default behavior).

If your scanner connects or reconnects to a Bluetooth host device /

application, it emits a series of beeps from low to high and the blue

Intermec Ready-to-Work indicator turns solid blue (default scanner

behavior).

Pair with a Bluetooth Host Device

If your SF61B is discoverable (not connecting or not already

connected to a Bluetooth host) you can pair it with a Bluetooth host

device and establish a Bluetooth connection between the two devices

(see Chapter 2, Connect the SF61B).

Connect on Power-Up

While the scanner is waiting for a connection, the blue Intermec

Ready-To-Work LED blinks slowly.

Host-Initiated (Outgoing) SPP Connection

If your scanner is paired with a Bluetooth host device and was

connected when it powered down, you will have to re-establish the

connection manually when it powers up again.

After 5 minutes of inactivity (default behavior, modifiable), it will

power down if the connection is not established.

All Other Connection Types

If your scanner is paired with a Bluetooth host device and was

connected when it powered down, it will automatically try to

reconnect at power-up.

After 5 minutes of inactivity (default behavior, modifiable), it will

power down if the connection is not established.

Note: Being discoverable is the default behavior of the SF61B, but you

can use EasySet to make your product not discoverable if you wish

(Interface > Bluetooth > Discoverable > Not discoverable).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 103 104

Sem comentários

Intermec SF61B 1D Guia do Utilizador Página 19