Intermec CK61 Manual do Utilizador descarregar pdf (Página 96)

Chapter 4 — Troubleshooting and Maintaining the CK61

84 CK61 Mobile Computer User’s Manual With Windows Mobile

The CK61 indicates it is not

authenticated.

Make sure that:

• the User Name and Password parameters on the CK61

must match the user name and password on

authentication server. You may need to reenter the

password on both the CK61, authentication server.

• on your authentication server, the user and group are

allowed and the group policy is allowed to log into the

server. For help, see the documentation that shipped with

your authentication server software.

• the IP address and secret key for access point must match

the IP address and secret key on the authentication server.

You may need to reenter the IP address and secret key on

both your access point and authentication server.

• the authentication server software is running on the

server PC.

You receive a message saying “The

server certificate has expired or

your system date is incorrect” after

you perform a clean boot on the

CK61.

Date and time are not saved when you perform a clean boot.

Reenter the date and time, and then save your changes.

Problems While Scanning Bar Codes

Problem Solution

You cannot see a red beam of light

from the scanner when you press

the Scan button and aim the

scanner at a bar code label.

• You may be too far away from the bar code label. Try

moving closer to the bar code label and scan it again.

• You may be scanning the bar code label “straight on.”

Change the scanning angle and try again.

• Move within two feet of a wall to test the effective scan of

the scanner. For help scanning bar codes, see “Scanning

Bar Codes” on page 18.

The input device attached to the

computer does not work well or

read bar code labels very quickly.

Set the Scanner Model command to the specific attached

input device. Check enabled bar code symbologies and

enable only the symbologies being used. For help, see

“Configuring the CK61 With Intermec Settings” on

page 23.

Problems While Configuring 802.1x Security (continued)

Problem Solution

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 127 128

Comentários a estes Manuais

Sem comentários

Intermec CK61 Manual do Utilizador Página 96

Comentários a estes Manuais

Manuais e produtos relacionados com Computadores de bolso Intermec CK61