Intermec CK60 Manual do Utilizador descarregar pdf (Página 114)

Chapter 5 — Network Support

100 CK60 Mobile Computer with Windows CE User’s Manual

Using Static WEP Security

The CK60 uses the Wired Equivalent Privacy (WEP) protocol to add

security to your wireless network based on the 802.11b/g standard. To use

WEP security, you need an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security

Use this procedure to set Static WEP security with Funk security.

1 Make sure you have configured the communications and radio

parameters on your CK60 and that Funk is your security choice.

2 Open Intermec Settings. Tap (+) to expand Communications > 802.11

Radio > Funk Security > Profile X with “X” being “1” through “4.”.

3 For Association, select “Open” and press Enter.

4 For Encryption, select “WEP” and press Enter.

5 For 8021x, select “None” and press Enter.

7 For Transmit key, select which WEP key to use for encryption of

transmitted data.

8 Define a value for each key, up to four. Enter an ASCII key or a hex key

either 5 or 13 bytes long based on the radio capability. Set a 5-byte value

for 64-bit WEP or a 13-byte value for 128-bit WEP. Precede hex keys

with 0x and make sure the keys use 5 or 13 hex pairs.

Configuring Microsoft Security

The default security setting is Funk. If you want to use Microsoft security,

you need to select it as your security choice.

To select Microsoft Security

1 Select Start > Settings > Control Panel.

2 Double-tap the Intermec Settings icon.

3 Tap (+) to expand Communications > 802.11 Radio > Security

Choice.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 123 124

Sem comentários

Intermec CK60 Manual do Utilizador Página 114