Intermec CK60 Manual do Utilizador descarregar pdf (Página 20)

Chapter 1 — Using the Computer

6 CK60 Mobile Computer with Windows CE User’s Manual

Supported Devices

The CK60 should connect the following scanner models: 1551, 1553,

1555; ScanPlus 1800SR, 1800ST, 1800VT; Scan Image 1470; SF51; and

SF61. There are a number of different scan engines covered by these

models, including RFID and XLR scan engines. Model 1555 and Scan

Image 1470 are supported as input devices only; configuration of these

models are accomplished by scanning labels.

Using the Ambient Light Sensor

The ambient light sensor automatically turns off the display lighting as

surrounding light increases to conserve your CK60 battery power. As

configured from the factory, the ambient light sensor is disabled.

To enable the ambient light sensor and change its settings

4 Make your selections, then tap OK to exit this applet.

Using the Battery

The CK60 uses a 17.3 Watt-hour, 7.2V, replaceable Lithium-Ion (Li-ion)

battery. Fully charge the battery before using the CK60. When changing

the battery, a backup battery (super capacitor) maintains your state,

memory, and real-time clock for at least 10 minutes.

The battery used in this device may present a fire or chemical burn

hazard if it is mistreated. Do not disassemble it, heat it above 100°C

(212°F) or incinerate it.

If you fail to replace the battery immediately, you may lose important

state or applications.

1 Tap Start > Settings > Control Panel.

2 Double-tap the Backlight icon.

3 Tap the right arrow to scroll to and tap the Both Power tab.

This restores the backlight setting once CK60 powers on

This turns off the ambient light sensor.

This disables the backlight in normal environments.

This disables the backlight in bright environments.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 123 124

Sem comentários

Intermec CK60 Manual do Utilizador Página 20