Intermec CK70 Manual do Utilizador descarregar pdf (Página 114)

Chapter 6 — Configure the Computer

100 70 Series Mobile Computer User Manual

Configure Static WEP Security with Funk Security

Use the following procedure to configure static WEP security with

Funk. Intermec recommends that you use WPA2-PSK instead of WEP

if possible.

1 Make sure the communications and radio parameters on your

computer are configured.

2 Make sure Funk is selected as your security choice.

3 Start Intermec Settings.

4 Select Communications > 802.11 Radio > Funk Security.

5 Select the profile you want to configure.

6 For Association, select Open.

7 For Encryption, select WEP.

8 For 8021x select None.

9 Define a value for the keys you want to use. You can define up to

four keys (Key 1 through Key 4).

Enter an ASCII key or a hex key that is either 5 bytes or 13 bytes

long depending on the capability of the radio. Set a 5- byte value for

64-bit WEP or a 13-byte value for 128-bit WEP. Hex keys must be

preceded by 0x and contain 5 or 13 hex pairs.

10 For Transmit key, select the key you want to use for transmitting

data.

11 Save your settings.

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 217 218

Sem comentários

Intermec CK70 Manual do Utilizador Página 114