Intermec PC43t Manual do Utilizador descarregar pdf (Página 128)

Chapter 5 — Troubleshoot the Printer

114 PC23 and PC43 Desktop Printer User Manual

Restore Defaults by Using a Hardware-Based

Reset

You can restore the printer defaults by performing a hardware-based

reset.

1 Turn the printer off.

2 Pull one or both of the printer latches forward and lift the printer

lid.

3 Turn the printer on.

My icon printer uses the ZSim

printer language and prints

configuration labels every time I

turn the power on.

Icon printers running ZSimprint

configuration labels on startup by

default. To prevent this, use Notepad to

create a .txt file named

“STLABPD41nPM43.txt”. In the file, type

“0”. Copy the file to the /home/user

directory on the printer.

My printer does not

communicate with my desktop

PC when they are connected with

the USB-to-parallel adapter cable.

Windows may not have installed the

driver. Follow these steps:

1 Connect the adapter cable to the

printer but not to the PC.

2 Turn the printer on and wait until the

startup process is complete.

3 Turn the printer off, and then turn the

printer on.

4 Connect the adapter cable to the PC.

Windows auto-detects the printer and

installs the driver.

5 After the driver is installed, run a test

print.

Problems and Possible Solutions (Continued)

Problem Possible Solution

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 189 190

Sem comentários

Intermec PC43t Manual do Utilizador Página 128