Intermec PC43t Manual do Utilizador descarregar pdf (Página 82)

Chapter 2 — Set Up the Printer

68 PC23 and PC43 Desktop Printer User Manual

Run the RFID Calibration Wizard

Run the RFID calibration wizard to determine the best Tag Position

and Output Power (UHF inlays, only) for RFID media.

1 Make sure the media type and media length are properly

configured.

2 From the Main Menu, select Wizard > Calibration > RFID

Calibration.

3 To enable the RFID module, select Enable.

4 Load the RFID media.

5 Select OK.

When the calibration is complete, the printer displays the RFID

Tag Position and Output Power (UHF inlays, only).

Note: After you determine the correct RFID media settings, you can

save these settings to a printer profile and load the profile when you

need to print on the specific RFID media.

Use one of these methods to calculate Tag Position:

• Run the RFID wizard.

• Manually calculate the Tag Position.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 189 190

Sem comentários

Intermec PC43t Manual do Utilizador Página 82