Intermec PC43t Manual do Utilizador descarregar pdf (Página 134)

Chapter 5 — Troubleshoot the Printer

120 PC23 and PC43 Desktop Printer User Manual

For the icon printer, as the upgrade file is loaded, all icons in the

icon panel turn on and then turn off, except for the Maintenance

icon. After the upgrade file is loaded, the printer restarts and the

Ready-to-Work indicator turns on:

• If the Ready-to-Work indicator turns on and stays on, the

upgrade process is finished and the printer is ready to use.

• If the Ready-to-Work indicator is flashing, you need to restart

the printer once again to complete the upgrade.

• If the Ready-to-Work indicator is off, there may be a condition

that is preventing the printer from restarting. For example, the

printer lid may not be fully closed.

Upgrade Firmware from the USB Menu

If you have an LCD printer, you can upgrade the printer firmware

through the USB menu. This procedure is different from upgrading

firmware from a USB storage device without going through the USB

menu.

1 Make sure the USB storage device has a single partition and is

formatted as FAT16 or FAT32.

2 Download the printer firmware from the Intermec website.

3 On your USB storage device, create a /firmware directory.

4 Copy the firmware upgrade file (typically .bin format) to the

/firmware directory on the USB storage device.

5 Insert the USB storage device into the printer USB host port. The

USB Menu appears.

6 In the USB Menu list, select Upgrade Firmware.

7 In the Upgrade Firmware list, select the firmware upgrade file and

press . An “Upgrade Firmware?” message appears.

8 Press to start the upgrade. When the upgrade is complete, the

printer restarts and the Ready screen appears.

1 2 ... 129 130 131 132 133 134 135 136 137 138 139 ... 189 190

Sem comentários

Intermec PC43t Manual do Utilizador Página 134