Intermec CK31 Manual do Utilizador descarregar pdf (Página 29)

Chapter 1 — Using the CK31 Handheld Computer

12 CK31 Handheld Computer User’s Manual

To disable Caps Lock

• Press the orange B key and then press either Shift or A

(depending on your keypad). The Caps Lock icon disappears

from the status bar.

Using the Power (I) Key

When you press the I key to turn off the CK31, you actually

put the computer in Suspend mode. In Suspend mode, the

CK31 continues to supply power to all memory, but turns off

power to most hardware. This power-saving feature is designed

to prolong battery life.

When you press the I key to turn the CK31 back on, your

computer resumes at the screen that was displayed when you

turned it off. If you are using WPA or 802.1x security, the

computer may need to reauthenticate before it resumes your

application.

If the Battery light flashes and your CK31 does not resume after

pressing I, your battery may be too low to supply power.

Replace the battery. If replacing the battery does not solve the

problem, see “Booting the CK31” on page 125.

Disabling or Modifying Keypad Functions

If you want to restrict the ability to perform adjustments made

from the keypad, such as changing the beeper volume, you can

disable the functionality of several keys on the keypad.

You can disable these keypad functions:

• Beeper volume

• Task Manager (opened by pressing Alt and then Tab)

Note: When you disable Alt Tab, you also disable Alt Esc.

You can modify this keypad function:

• The behavior of the I key. You can configure the boot

functionality to either warm or cold boot when you press and

hold the I key for five seconds.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 207 208

Sem comentários

Intermec CK31 Manual do Utilizador Página 29